Digifly Cartesio plus User Manual Download Page 20

Page: 20 / 72

Page 20

To show additional information in any of these customizable fields, press the

keys to highlight & select the data field you wish to adjust.

As you scroll up or down, the fields that you can customize are highlighted (inverted)

and a description of the data currently being shown is that field is shown for approx 3

seconds.

To change the data you wish to display, press the

key. Each time the data field

is changed, the field briefly shows a description of the data type currently selected.

4.7

TIME INFORMATIONS

The Digifly instrument can display time information related to Waypoints and Routes:

ero: Estimated relative time related to start gate time in seconds, negative = advance

(wrong) / positive = delay (correct).

es: Remaining time to start pylon gate open.

e1: Estimated remaining time to current Waypoint.

e2: Estimated remaining time to next Waypoint.

eA: Estimated remaining time to goal.

ts: Start pylon absolute time .

t1: Estimated time to current Waypoint.

t2: Estimated time to next Waypoint.

tA: Estimated time to Goal.

rt: UTC Time.

ch: Chronograph.

Summary of Contents for Cartesio plus









































































Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands

Digifly Cartesio plus, User Manual

Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands