Digifly Cartesio plus User Manual Download Page 16

Page: 16 / 72

Page 16

DISPLAY

4.1

MAIN DISPLAY SCREENS

The are 3 main display screens on the Digifly instrument:

The Thermal Display , the Glide Compass Display and the Glide Plotter Display.

To manually switch between these 3 main display screens, press the

key.

THERMAL DISPLAY

GLIDE COMPASS DISPLAY

GLIDE PLOTTER DISPLAY

4.2

AUTOMATIC SCREEN SWITCHING - INTELLIFLIGHT

The Intelliflight function handles the automatic screen

switching between the Thermal Display screen and Glide

Compass Display or Glide Plotter Display screens.

To enable this function go to (ADVANCED SETUP \ n. 1 IFLY)

and set it to “ON”.

The Digifly instrument will switch automatically to the

Thermal Display screen when the conditions of a thermal are

met.

To set the thermal detection parameters, go to (ADVANCED

SETUP \ n. 2 THEV) and (ADVANCED SETUP \ n. 3 THET) to adjust the vertical speed

(vario) and for how many consecutive seconds this vertical speed has to be detected.

The instrument will then switch back to the Glide Compass or Glide Plotter display

screens when there is no lift for more than 10 seconds.

Summary of Contents for Cartesio plus









































































Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands

Digifly Cartesio plus, User Manual

Search results

Summary of Contents for Cartesio plus

Reviews:

Related manuals for Cartesio plus

Brands by name

Popular brands