Page 33
12.5
NAVIGATION TO STANDARD WAYPOINT
If the current Waypoint is not set as a start pylon, the navigation is managed in ‘standard cylinder mode’ and
the Digifly Air will drive you providing constant
info about your posistion, distance, direction,
required glide ratio and expected arrival
height above the waypoint.
When you arrive near the cylinder (see the
Waypoint’s parameter NEAR) the flight
recorder rate is automatically set to one data
point per second. The parameter “NEAR” can
be modified from the page Waypoint’s edit.
Cylinder validation: entering in a cylinder the
Digifly air will alert you with a sound and will appear the messageo “WPOK”, then flight recorder rate returns
to the setup value (MAIN SETUP \ n. 5 RECR). .
12.6
NAVIGATION TO CONCENTRIC WAYPOINT
To properly manage a task’s route with concentric waypoints it is necessary to insert in the desired route the
same waypoint two-three or more times, accordingly to the task route, but with different cylinders radius.
R WP1
R WP3
R WP2
WP
4 4
