Page 18
Absolute time (hour/min)
-
ts: absolute time to start pylon gate
-
t1: Expected absolute time to the current Waypoint.
-
tA: Expected absolute time to goal.
-
rt: Absolute time UTC (hours/min).
5.6
DISTANCES
It is possible to set the distance’s unit of measure using the parameter (MAIN SETUP \ n. 16 U-SP) the same
used also for the speed value.
-
dstT: Distance to last thermal.
-
dst1: Distance to last Waypoint.
-
dstA: Distance to goal (along the route).
-
dst0: Distance to the cylinder
5.7
AIR EFFICIENCY (GLIDE RATIO)
-
efrT: Needed glide ratio to the last thermal.
-
efr1: Needed glide ratio to current Waypoint.
-
efrA: Needed glide ratio to goal (along the route).
-
effA: Glide ratio referred to air.
5.8
TRACKING & BEARING
-
BRT: Direction (bearing) to last thermal.
-
BR0: Direction (bearing) to the center of the currrent Waypoint.
-
BR1: Direction (bearing) to the optimized point of current Waypoint.
-
TRK: Tracking (current direction referred to North)
5.9
BAROMETER
The barometric pressure can be visualized on every one of the customize fields.
It is possible to rectify the shown pressure value modifying the calibration with the parameter (ADVANCED
SETUP \ n. 4 KBAR).
Warning:
a wrong use of this parameter makes the barometric altimeter data less reliable.
5.10
TIME/CHRONOGRAPH SETUP
rt: UTC time (clock).
ch: Chrono (chronometer).
To zero the chronograph, press the
(long press).
