Page 26
or cancel the procedure using the key
.
9.1.5
DEACTIVATING NAVIGATION TO A WAYPOINT (GOTO)
To deactivate the current navigation, from the page GPS INFO, press the key
(long press) then confirm the
choice to deactivate the navigation pressing again the key
, or cancel the procedure using the key
.
9.2
NAVIGATION’S FUNCTIONS TO A WAYPOINT (GOTO)
The following navigation’s functions are available only if a navigation toward a single waypoiny (GOTO) is active:
9.2.1
DIRECTION, DISTANCE, HEIGHT TO CURRENT WAYPOINT (GOTO)
It is a very useful function that indicated the direction "br1", distance "dst1" and estimated height (H1) of
arrival on the current waypoint;
The arrival altitude on the current (H1) is computed integrating the following info: Altimeter A1, distance to the
Waypoint "dst1" , Waypoint altitude and medium glide ratio.
The Waypoint’s altitude have to be included in the Waypoint’s name:
o
aaaNNN visible on the bottom of the waypoint’s page.
o
aaa = 3 alphanumeric characters for the Waypoint’s name.
o
NNN = waypoint altitude above sea level, in tens of meters. Note: if the field NNN doesn’t contain three
numbers, then the navigation uses the Altitude field.
The medium glide ratio is continuously update during the glide and stored in the memory during the thermal
flight.
9.2.2
NEEDED GLIDE RATIO TO THE CURRENT WAYPOINT (GOTO)
It is the estimated requested glide ratio to reach the current Waypoint “efr1".
9.2.3
ARRIVAL HOUR, ARRIVAL TIME TO THE CURRENT WAYPOINT (GOTO)
It is the expected arrival hour "t1" and the expected arrival time "e1" to the current waypoint.
9.2.4
HSI GRAPHIC INDICATION TO THE CURRENT WAYPOINT (GOTO)
This info is available in the PLOTTER page and provides to the pilot a
quick and intuitive navigation’s graphic instruction to the WP, see
paragraph 4.2.7.
This indication is deactivated if the current turn point is a “start
pylon”.
10
ROUTE MANAGEMENT
10.1
PREFIXED GENERAL ROUTES
