Digidim Helvar 924 Page 9 Installation And User Manual Download

Page: 9 / 58

Helvar 924 LCD TouchPanel: Installation and User Guide

Doc. 7860137,

issue 6, 2014-08-28

3. Switching ON for the first time

TouchPanel requires some configuration before it can be used. The configuration process is a once-only process that

starts automatically when TouchPanel is switched on, unless the configuration process has been completed previously.

Once the mode of operation has been set, you can only change it by resetting TouchPanel to factory defaults. To

learn how to do this, see section 14.

3.1 Setting Language, Mode, Date And Time

1. Switch TouchPanel on and wait up to 30 seconds.

2. The Language menu will appear.

3. Select a language.

to accept the language.

7. If not previously set, the Set Date And Time menu will appear.

and to set the date and time.

9. to accept the date and time.

10. The Default Screen will appear. TouchPanel is now ready for use.

5. The Select Mode menu will appear. Press Master Panel, Toolbox

Slave, Workshop Slave, or Designer Slave to set the mode of

operation. To learn more about each mode, see section 3.2.

to accept the mode.

Once the mode of operation has been set, you can check the

mode setting later by viewing the About screen. To learn more,

see section 20.2.

TouchPanel can retain its configuration settings indefinitely.

However, if TouchPanel remains without power for more than

approximately two days then the date and time may need to be

reset. To learn how to set the date and time, see section 16.

Summary of Contents for Helvar 924



























































Search results

Summary of Contents for Helvar 924

Reviews:

Related manuals for Helvar 924

Brands by name

Popular brands

Digidim Helvar 924, Installation And User Manual

Search results

Summary of Contents for Helvar 924

Reviews:

Related manuals for Helvar 924

Brands by name

Popular brands