6
Helvar 924 LCD TouchPanel: Installation and User Guide
Doc. 7860137,
issue 6, 2014-08-28
2.5 Using Configuration menus and Pop Up menu
The Configuration menus and Pop up menu are used together to perform many different tasks. Normally you press an item
to select it but, sometimes the Pop up menu is made available when an item can have an action performed on it.
To perform an action on an item, select the action from the Pop up menu, and then press the item on which you want
to perform the action. Some Pop up menu commands work just once, but some remain active until you quit from them.
For example, if you select the delete command , you can continue to select and delete items until you quit from that
command. The following example shows the delete command in use:
1
Press to select the delete command.
This screen shows a list of Loads, which in this case are SCR
Dimmer channels. The last is a missing load and is shown in
GREY.
If only one Pop up menu icon is visible, you may be in
a command already. Press that icon to quit from the
command and display the Pop Up menu.
2
Select the load to delete. Only missing loads can be deleted. It
will be highlighted in RED.
3
Press to confirm the deletion. Notice that the delete icon
remains visible in the corner of the screen. This indicates that
the delete command is still active.
4
If you wish, select another SCR Dimmer to delete it. When you
have finished deleting items, press to quit from the delete
command.
