DigiDesign RM1, Manual

Page: 15 / 32

Chapter 3: Setup and Operation 9
chapter 3
Setup and Operation
This chapter provides instructions to connect,
configure, and use the Digidesign RM1 and RM2
Reference Monitors.
Correct placement and connection ensures opti-
mal performance and safe operation of your
monitors.
Getting Started
Unpacking the Monitors
After opening the box, be sure to reach down
the sides of the monitor to lift it out of its box.
This protects the HF and LF drivers (on the
front) from being dented or punctured by your
fingers, and prevents any possible damage to
the switches, connectors, and other controls on
the back of each monitor.
Reuse and Recycling
Please retain your packaging for future use. The
cartons are durable, reusable and can be em-
ployed to safely transport your loudspeakers
should they need to be relocated.
Setting Up the Speakers
Reference monitors should always be placed to
provide balanced, accurate sound in your pre-
ferred mixing position. The exact location de-
pends on the size and acoustics of the environ-
ment where the speakers are being used. In all
installation, observe the following guidelines:
• Place the speakers so they are at the same
height as your ears.
• Place the monitors on quality stands, or
mount them on a wall using the proper
brackets.
• DO NOT soffit mount or otherwise enclose
the monitors; they require free air flow
around the back panel.
Placement Guidelines
Always stand them up in their intended orienta-
tion. Do not put the monitors on their sides.
Do not restrict air flow around the speakers.
The right way (left) and the wrong way (right)
Correct Incorrect