Command|8 Guide
58
Switch Test
Use this test to evaluate the performance of
Command|8 switches.
To test switches:
1
Press the F1 Utility switch to enter Utility
mode.
2
Press the Channel Select switch that corre-
sponds to Switch.
3
Press any Command|8 switch to test it. The
LCD displays the location and name of each
switch as you test it.
4
Press the Channel Select switch that corre-
sponds to Exit.
5
Press the F1 Utility switch to exit Utility mode.
Encoder Test
Use this test to evaulate the performance of the
Command|8 rotary encoders.
To test the encoders:
1
Press the F1 Utility switch to enter Utility
mode.
2
Press the Channel Select switch that corre-
sponds to Encodr.
3
Rotate any encoder to test it. Encoder value is
displayed in the LCD while testing.
4
Press the Channel Select switch that corre-
sponds to Exit.
5
Press the F1 Utility switch to exit Utility mode.
Burn-In Test
Use this test to activate all of the indicators and
controls on Command|8 simultaneously.
To run the Burn-In Test:
1
Press the F1 Utility switch to enter Utility
mode.
2
Press the Channel Select switch that corre-
sponds to BurnIn.
3
Press the Select switch on Channel 8 to stop
the test.
4
Press the F1 Utility switch to exit Utility mode.
Summary of Contents for Command 8
Page 1: ...Command 8 Version 8 0 ...
Page 4: ......
Page 10: ...Command 8 Guide 4 ...
Page 60: ...Command 8 Guide 54 ...