DigiDesign Command 8, Manual

Page: 29 / 68

Chapter 3: Command|8 Overview 23
Insert/Send Position Indicators A–E/F–J
Select
the send or insert position to display. These
switches determine which of the ten available
sends (A–J in Pro Tools) or ten available insert
positions (A–J in Pro Tools) are displayed in
Console View.
The five Console View switches are dual-func-
tion (A/F, B/G, C/H, D/I, E/J). Sends F–J and In-
serts F–J are accessed with the Shift key.
Default
Resets a fader to its default setting (only
applies to fader-mapped parameters).
Display Mode
Selects display mode options.
Mon/Ø Toggles Auto Input and Input Only
Monitor mode for record enabled tracks.
Channel View Switches
Channel View focuses on a single track (channel
strip) and lets you display all plug-in, pan, send,
or insert values horizontally across all LCD dis-
plays, and adjust them with the channel rotary
encoders and switches.
EQ
Identifies channels with equalizer plug-ins
assigned to them by illuminating their Channel
Select switches. If no EQ plug-ins are present, no
Channel Select switches will be lit.
When you press an illuminated Channel Select
switch, controls for the first EQ plug-in on that
track are assigned to the rotary encoders and dis-
played in the LCD.
Switched controls (such as Master Bypass or
Phase Invert functions) are controlled by the
Channel Select switches.
Dynamics
Identifies channels with dynamics
plug-ins (such as compressors or limiters) as-
signed to them by illuminating their Channel
Select switches. If no dynamics plug-ins are
present, no Channel Select switches will be lit.
When you press an illuminated Channel Select
switch, controls for the first Dynamics plug-in
on that track are assigned to the rotary encoders
and displayed in the LCD.
Switched controls are controlled with the Chan-
nel Select switches below the corresponding
LCD display.
Inserts
Identifies channels with any kind of in-
sert assigned to them (including plug-ins or
hardware I/O inserts) by illuminating their
Channel Select switches. If no inserts are
present, no Channel Select switches will be lit.
When you press an illuminated Channel Select
switch, the names of all inserts on that track are
displayed in the LCD. To select a plug-in insert
for editing, press the corresponding Channel Se-
lect switch. (While the names of hardware I/O
inserts are displayed, they have no editable pa-
rameters, so the Channel Select switches and the
rotary encoders have no effect on them.)
Channel View Selectors
EQ
Dynamics
Insert
Pan/Send/PRE
< Page >
Master ESC
Bypass