digicon dTower, Product Manual

Page: 8 / 48

8
Electric shock can cause personal injuries or even death. Avoid direct contact with
dangerous voltages at all times. The protective grounding connection, when offered,
is essential for a safe operation and must be checked before connecting the
equipment to the power grid.
Know the following warnings and safety guidelines:
Dangerous voltages
·
Only qualified technical professionals can install or replace the equipment.
·
Only qualified technical professionals can remove equipment doors and
access any components, except for the card-collecting box and the circuit
breaker.
·
Before performing any maintenance, turn off the power of the equipment by
moving the circuit breaker key to the position OFF
Grounding
·
Do not violate the protective grounding by using an extension cable, a
feeding cable, or an autotransformer without protective earth conductor.
·
Be careful to maintain the protective grounding of this equipment during
maintenance or repair and to reestablish the protective grounding before
putting the equipment in operation again.
2 2 . Installation site
When selecting the installation site, meet the following standards:
Protective grounding - The protective grounding of the building's electrical
installation must meet national and local regulations.
Environmental conditions – The installation site must be dry, clean, and ventilated.
Do not use this equipment where it can get in contact with water. Make sure that this
equipment is operational in an environment that meets the requirements established
in the equipment's technical specifications found in this manual.
Ÿ
Installation requirements
Ÿ
Overload of electrical network
Know the effects of overload before connecting this equipment to the electrical network.
An easily accessible shutdown device must be installed on the external of the equipment
or set of equipment.
WARNING
Only allow qualified personnel to install this equipment. The installation
must be in accordance with all local standards and regulations.
CAUTION
Consider the connection of this equipment to the electrical network and
the effect that an overload can have on the overcurrent protection and
the electrical wiring. Check the consumption information in this manual.
Tower