digicon dTower, Product Manual

Page: 35 / 48

35
a) Safe mode:
Selection: DS2-P5
When this setting is active, the equipment doors remain open while the user blocks the
sensors present in the equipment. When inactive, the doors close, forcing users to
unblock the passage area.
b) Card retention time in collecting box:
Selection:
DS2-P6
Setting up of how long the card deposited on the collecting box must remain available for
reading before definitive collection.
c) Configuration of passage confirmation:
Selection:
DS2-P7
(Configuration only available in the clips)
It allows user passage confirmation through the passage gap.
To identify this event, the equipment generates a small door movement (invitation) and
waits for the user to signal their intention of passing by slightly pushing the door.
When passage is identified, the equipment generates confirmation according to the DS2-
P7 configuration: passage confirmation by pulse or passage confirmation by disk
emulation.
d) Operational mode:
Selection:
DS2-P8
It selects the equipment operational mode:
dTower
mode, where the sensors track the user throughout the passage;
Clip mode, which operates without the help of sensors to control passage and is based
only on passage timeout for closing the doors.
Tower