Digi XLR PRO, User Manual, Page: 88 / 106

Update firmware with Device Cloud
XLR PRO Radio Frequency (RF) Modem User Guide 88
Update firmware with Device Cloud
1. After logging on to Device Cloud, select the Device Management tab
2. Right click on the device to update. (Device Type should be XLR PRO and the Device ID will match the MAC address
of the XLR PRO to be updated.)
3. In the drop-down box, select Firmware->Update Firmware .
4. Click Browse to select the .ebin firmware image file to be loaded.
5. Click Update Firmware . A progress appears. Loading the firmware file takes about 100 seconds
6. After fifteen seconds, the XLR PRO power LED illuminates.
After about 30 seconds, the new firmware is fully operational and running.
Configure XLR PRO with Device Cloud
XLR PRO configuration includes the following options:
•
Device Cloud (see Configure Device Cloud connectivity options on page 89)
•
Ethernet network (see Configure Ethernet network options on page 90)
•
Ethernet RF bridging (see Configure Ethernet RF bridging options on page 91)
•
IP socket mode (see Configure IP Socket Mode options on page 92)
•
Serial mode (see Configure serial mode options on page 93)
•
System (see Configure system options on page 94)
•
Web configuration (see Configure web configuration options on page 95)
•
XLR radio (see Configure XLR radio configuration options on page 96)