Addressing discovery/configuration commands
XLR PRO Radio Frequency (RF) Modem User Guide
41
FN
Find Neighbors
. Discovers and reports all XLR PROs
found within immediate RF range. The following
information is reported for each XLR PRO discovered.
N/A
N/A
MY<CR> (always 0xFFFE)
SH<CR>
SL<CR>
NI<CR> (Variable length)
PARENT_NETWORK ADDRESS<CR> (2 Bytes) (always
0xFFFE)
DEVICE_TYPE<CR> (1 Byte: 0=Coord, 1=Router,
2=End Device)
STATUS<CR> (1 Byte: Reserved)
PROFILE_ID<CR> (2 Bytes)
MANUFACTURER_ID<CR> (2 Bytes)
DIGI DEVICE TYPE<CR> (4 Bytes. Optionally
included based on NO settings.)
RSSI OF LAST HOP<CR> (1 Byte. Optionally
included based on NO settings.)
<CR>
If the FN command is issued in command mode, after the
number of milliseconds as listed by the N? pa
overhead time, the command ends by returning a <CR>.
If the FN command is sent through a local API frame, each
response is returned as a separate Local or Remote AT
Command Response API packet, respectively. The data
consists of the above listed bytes without the carriage
return delimiters. The NI string will end in a "0x00" null
character.
Command
Name and description
Range
Default