Update firmware with XCTU
XLR PRO Radio Frequency (RF) Modem User Guide
76
•
To assign a static IP address to the XLR PRO, set the following parameters:
MA (addressing mode):
Set the addressing mode to 1 (static).
MY (XLR IP address):
Enter the IP address for the XLR PRO.
MK (XLR subnet mask):
Enter the subnet mask for the XLR PRO.
GW (XLR gateway address):
Enter the default gateway address for the XLR PRO.
After setting the parameters, write the new parameter values to save the settings.
Update firmware with XCTU
Note
To update XLR PRO firmware, you need XCTU version 6.1.2 (or above).
To update firmware using XCTU:
1
Launch XCTU.
2
Click
Add devices
or
Discover devices
to add the XLR PRO to the list of radios.
a
Select the COM port to which the XLR PRO serial port is connected.
b
Select the baud rate (9600 8-N-1 by default).
c
Switch baud rate to 115200b/s to reduce the time required to update the firmware.
d
Close the COM port and reopen it at the new baud rate.
3
Select the radio configuration tab.
4
Click the icon to download the firmware.
5
Select the desired firmware, function set, and firmware version.
6
Click
Finish
and then the
Yes
.