Set Ethernet RF bridging options
XLR PRO Radio Frequency (RF) Modem User Guide
79
4
For DHCP or static addressing, you can specify the Domain Name Server address:
DNS Address:
For DHCP addressing, enter a specific DNS address to override the DNS address learned from the
DHCP server; for static addressing, enter the DNS address to use. Enter the address in IPv4 format.
Note
The default DNS address is 0.0.0.0. If you use the default DNS address and static mode is configured,
OpenDns
servers are used.
5
Click
Apply
.
Set Ethernet RF bridging options
By default, bridging is disabled. To enable bridging and set a destination address:
1
From the XLR PRO Configuration and Management page, select
Ethernet RF Bridging
. The Ethernet RF Bridging
Configuration page appears.
2
Enter the following:
Enable Ethernet RF Bridging:
Select this option to enable bridging mode; to disable bridging, deselect this
option.
Destination RF MAC Address:
If bridging is enabled, enter a destination RF MAC address. A destination address of
00000000:000FFFF is broadcast.
3
Click
Apply
.