Addressing discovery/configuration commands
XLR PRO Radio Frequency (RF) Modem User Guide
39
Addressing discovery/configuration commands
Command
Name and description
Range
Default
DN
Discover Node
. Resolves an NI (Node Identifier) string to
a physical address (case sensitive).
20 byte ASCII
string
The following events occur after the destination node is
discovered:
<AT Firmware>
1
DL and DH are set to the extended (64-bit) address of
the XLR PRO with the matching NI (Node Identifier)
string.
2
OK (or ERROR) <CR> is returned.
3
Command Mode is exited to allow immediate
communication.
<API Firmware>
0xFFFE and 64-bit extended addresses are returned in an
API Command Response frame.
If there is no response from a XLR PRO after the number
of milliseconds as listed by the N? parameter, or a
parameter is not specified (left blank), the command is
terminated and an “ERROR” message is returned. In the
case of an ERROR, Command Mode is not exited.
ND
Network Discover
. Discovers and reports all XLR PROs
found. The following information is reported for each XLR
PRO discovered.
20 byte ASCII
string
(optional)