Digi Digi Conntect ME, Hardware Reference Manual

Page: 23 / 64

„ „ „ „ „ „ „
2 3
A b o u t t h e D e v e l o p m e n t B o a r d
GPIO Port Pin Orientation
Connectors and Blocks
The development board provides the following connectors and blocks:
„ Embedded Module Connector, P7
„ Module JTAG Interface Connector, P8
„ JTAG Debugger Connector, P4
„ Jumper Block, P12
„
Logic Analyzer Header, P6
See the figure titled "Board Layout" on page 18 for the location of the connectors and
blocks. The following sections describe the connectors and blocks.
Embedded Module Connector, P7
The Digi Connect ME embedded module Connector is a 20-pin female vertical header that
is labeled P7 on the development board. The connector is used with the integration kit and
Pin 1 Pin 10
0
0000020
GPIO Port Pin Assignments
Pin
1
Pin
2
Pin
3
Pin
4
Pin
5
Pin
6
Pin
7
Pin
8
Pin
9
Pin
10
Signal GND GPIO-5 GND GPIO-4 GND GPIO-3 GND GPIO-2 GND GPIO-1
DC_ME-HWR.book Page 23 Thursday, July 1, 2004 11:12 AM