Advanced configuration with aView
Terminal on unit
Digi 5400-RM Cellular Remote Manager User Guide
28
10.
Save
and apply the new configuration settings to the device.
Router mode
In this mode, the device operates as a standard DHCP router. The device will be configured to hand
out a range of LAN IP addresses to client devices connected on its Ethernet port. Standard router
options are available in the device’s configuration, including DHCP lease options, DNS options, firewall
options, and port forwarding rules.
The following list of steps details how to setup a simple DHCP server on the device in router mode.
1. Click to expand
Network -> Interfaces -> LAN.
2. Select the
Enabled
checkbox.
3. For
Interface type
, select
Ethernet
.
4. Set the IP address for the device:
a. Click to expand
IPv4
.
b. For
Type
, select
Static IP Address
.
c. For
Address
, type the IP address you wish to assign to the device for its LAN DHCP
network (that is, the gateway IP for the DHCP network).
5. Enable the device's DHCP server:
a. Click to expand
DHCP server
.
b. Click
Enable
.
6.
Save
and apply the new configuration settings to the device.
Terminal on unit
Goal
To access the console of the Digi 5400-RM using the
Terminal on Unit
link presented in aView for the
device.
Note
Terminal on Unit
leverages the management tunnel established between the Digi 5400-RM and
aView. For details on the monthly data usage for this access, see
.