Welcome
Important information about upgrading to firmware version 20.2.x
Digi 5400-RM Cellular Remote Manager User Guide
11
4. Verify the signal strength indicator on the front of the Digi 5400-RM shows two or more bars
for proper operation.
Important information about upgrading to firmware version
20.2.
x
Device defaults to Digi Remote Manager after configuration erase
With firmware version 20.2.
x
, the default cloud-based management service for the Digi 5400-RM
device is Digi Remote Manager.
Digi 5400-RM devices upgraded from a firmware version prior to 20.2.
x
to firmware version 20.2.
x
or
greater will retain their central management configuration. Therefore, if the device was previously
configured to use aView for central management, it will continue to use aView after upgrading to
20.2.
x
or greater.
However, if you erase the configuration of a device that was upgraded from a firmware version prior
to 20.2.
x
, it will default to using Digi Remote Manager for cloud-based central device management.
You must reset the cloud configuration to use aView after a configuration erase.
Reset the cloud-based management service to aView
To the cloud-based management service to aView:
1. Log into the Digi 5400-RM WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.