Configuring the Digi 5400-RM device
Local configuration
Digi 5400-RM Cellular Remote Manager User Guide
23
3. Open a web browser on the PC type the IP address of the Digi 5400-RM, 192.168.210.1, in the
URL text field. Press Enter.
Note
If the Digi 5400-RM device does not give your PC an IP address via DHCP, you may need
to configure your PC manually set an IP address on your PC to be able to communicate with
the Digi 5400-RM, as described in
Manually Configuring PC to Connect to Device
4. Log into the Digi 5400-RM device as a user with admin privileges.
5. Select the System tab on the left side of the page.
6. Select the Browse button next to the Firmware image section.
7. Browse for and select the downloaded firmware file.
8. Click the Update Firmware button.
Do not turn off or unplug the device while it is upgrading its firmware. The upgrade process should
take less than one minute.
Use local configuration to define a custom APN
1. Connect your PC to the WAN Ethernet port of the Digi 5400-RM device.
2. Open a web browser on the PC type the IP address of the Digi 5400-RM, 192.168.210.1, in the
URL text field. Press Enter.
Note
If the Digi 5400-RM device does not give your PC an IP address via DHCP, you may need
to configure your PC manually set an IP address on your PC to be able to communicate with
the Digi 5400-RM, as described in
Manually Configuring PC to Connect to Device
3. Log into the Digi 5400-RM device as a user with admin privileges.
4. Select the Configuration tab on the left side of the page.
5. Type in the custom APN into the APN entry located in the modem section of the configuration.
6. Optional: If the custom APN requires a specific username and password, please input those
into the Username and Password entries.
7. Click the Save button.
Advanced Local Configuration
Once logged in via the local web interface you must enable local management of the device to modify
settings for the Cellular and Ethernet interfaces.
1. Uncheck box next to "
Enable central management
."
2. Click
Save
.
After saving the profile, the device will no longer attempt to sync with the management portal and a
full range of available configuration options will be visible. Hovering your mouse over the name for a
configuration option will display a pop-up providing help details about that option, including any
default values.