Revision history 90002393
Revision Date Decription
A
April
2020
Initial release the updated
Digi 5400-RM Cellular Remote Manager User Guide
for
firmware release 20.2:
n
With firmware release 20.2, Active Recovery has been renamed to Digi
SureLink
TM
.
n
After upgrading to firmware release 20.2, if a configuration erase is
performed, the Digi 5400-RM will default to Digi Remote Manager rather
than to aView.
See
Important information about upgrading to firmware version 20.2.x
for further
information.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
Customer support
Gather support information:
Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Digi 5400-RM Cellular Remote Manager User Guide
2