25
9. Now that the shaft
seal has been removed,
return the bearing to
inside the housing
10. Run some Loctite
263 (Red) around the
outside of the shaft seal
11. Place the shaft seal
in it’s position ensuring
it is level
12. Place a flat metal sheet
on top of the seal and tap
with a hammer so that the
seal sets evenly
13. Ensure the seal is flush
with the housing
14. Apply grease to the
inside of the shaft seal
15. Place housing on the shaft and
using a metal plate and hammer
tap until the shaft is fully inserted
CHANGING THE SHAFT SEAL
16. Place the tab washer
over the shaft lining up the
internal tabs