Option C: Valve Clip Attachment Bracket (model 30-832)
1. Slide the wires from the controller into the valve clip attachment bracket
and connect the valve clip attachment bracket to the controller using the
four (4) screws included (see ).
17
Column mounting (phase 2)
i
b
c
d
2. Connect the incoming station wire (V1 red) to the hot wires (red) on the
solenoid
USINg CONVENTIONAl DRy-SPlICE WATERPROOF CONNECTORS.
Connect the controller incoming station common wire (V1 white) to
the white wire on the solenoid
USINg CONVENTIONAl DRy-SPlICE
WATERPROOF CONNECTORS
and, if needed, repeat for the second valve
and sensor. Leave slack on each side of the wires so that repairs, if needed,
can be made easily (see ).
b
c
