4.
Using a Sensor
NOTE:
Do not install a sensor until the controller has been given an ID # by
the LEIT RC2ET remote control handset.
4.1 Sensor Installation
Remove the
WATERPROOF CONNECTORS
from the LEIT-2ET controller’s
yellow (or yellow and black) wires and splice them. Splice the sensor’s two,
normally closed (N/C), black wires. Connect one of each yellow wire or one of
the yellow and black wires from the controller with one of each black wires
from the sensor using
WATERPROOF CONNECTORS
(if sensor is connected,
the sensor will override the program when triggered).
20
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
10:00
RADIO UPLINK
RADIO UPLINK
YES / NO
CONNECT
CONNECT
CONTROLLER MENU
CONT. SETUP
CONTROL ID: 00
PMS
HW: 1.8 SW:3.2
CONTROL ID: 01
NO DESCRIPTION
CLIENT ID: XXX
CONTROL ID: 00
NO DESCRIPTION
ARE YOU SURE?
YES / NO
ARE YOU SURE?
UPLOADING
CONNECT
CONNECTING
CONNECT
DOWNLOADING
CONNECT
UPDATE
SUCCESSFUL
CONNECTED
CONNECTED TO
MAIN MENU
