CONNECTED appears momentarily, then, CONTROL ID: 00, NO DESCRIPTION
appears. Press again and CONTROL ID: 01, NO DESCRIPTION appears with Ø
blinking. At this point the user can assign a new controller ID.
b. To assign a controller ID, press or and enter a number (1-9) for the first
digit. Press and repeat the steps with the second digit (we recommend
changing the ID number to a number higher then 01). Next, assign description,
name or address (recommended). The default is NO DESCRIPTION. Press and
the first letter of NO DESCRIPTION is blinking. Press or and enter a letter
for the first digit. Press and repeat the steps for each letter. After completion,
press to download the new information with the new ID number and address.
Use the new ID number to connect to this controller and use the address or
name to identify the controller location.
c. Setting a new client ID (A-Z): The default ID is AAA (this is a security feature).
If the controller CLIENT ID is changed from AAA to other letters, the user must
update the handset to the same client ID after exiting the controller program.
Repeat the steps to select a new ID. When finished, press to connect and
upload the new information. ARE YOU SURE? screen appears. Press again
to download the information. UPDATE SUCCESSFUL message will appear
momentarily confirming that the controller received the information and Setup is
updated and complete. After the update is completed the SETUP MENU appears.
Exit SETUP MENU and the controller is ready to program.
The user can now easily connect back to this controller using the newly assigned
CONTROL ID and CLIENT ID. Repeat the steps to program additional controllers.
NOTE:
When connecting to a LEIT-2 controller, the controller and handset CLIENT
ID must be the same.
ATTENTION:
The two yellow (or yellow and black) sensor wires are left connected
so the RAIN OFF alert will not appear. If a rain sensor needs to be added, see
Section 4 – Using a Sensor.
19
