3. system comPonents
To properly install 700 series controllers the following components are needed:
OPtIOn 1
• 710-000 Single station controller with R710DC
solenoid or with DIG in-line valve assembly
• Optional valve adapter (see below)
OPtIOn 2
• 740-000 Four station or 746-000 Six station controller
• DIG in-line valve assembly or R710DC solenoid (one for
each valve used) if using existing valves
• Optional valve adapter (see below)
VALVE ADAPtER
• Models P00-995 and P00-996 are used with RAIn BIRD,
DV, PGA, PEB (3/4” and 1” only), GB, EFB-CP, BPE,
PESB and ASVF valves (adapter sold separately).
4. ValVe or Wall mountinG
4.1 VALVE MOUNTING
1. Press the controller
q
into the controller valve
mounting bracket
w
.
2. Press the controller with the valve mounting bracket
onto the solenoid and arrange the controller in a
preferred position (see also pg 6).
4.2 WALL MOUNTING
1. If not assembled, press the controller bracket
q
into
the back of the controller.
2. Place the mounting plate
r
on the wall using 3
screws (not included).
3. Slide the controller assembly with the bracket up
and into the mounting plate to secure. (Mounting
solenoid sleeve
w
is not used).
NOTE:
Be aware that the length of the controller
connecting cable limits the distance between the controller and the solenoid.
4
O-ring 200-021
Model #03-077
Model #P00-996
Model #P00-995
q
w
e
r
q
