Dietz Rehab CANEO B User Manual Download | Manualshive

Page: 21 / 64

background image

21

EN

EN

FR

IT

NL

04 USING THE WHEELCHAIR

04 USING THE WHEELCHAIR

Getting into your wheelchair

1.

Take off the leg rests (see chapter 4.4).

2.

If possible, place the wheelchair’s rear wheels against a solid

wall.

3.

Apply both parking brakes.

4.

Stand as close as possible to the wheelchair. Turn around, then

carefully move backwards until your legs touch the edge of the

seat.

5.

Now grab the armrest with your hands.

6.

You can now sit down slowly and safely.

7.

Then swivel both the leg rests back to the front in the direction of

travel. Listen and feel for the click to ensure that the leg rests are

correctly engaged.

8.

Finally, fold both the foot plates downwards using your feet and
place your feet on the foot plates (see chapter 3.4).

Getting out of your wheelchair

Carry the procedure out in the opposite sequence.

WARNING

Do not stand on the foot plates or footboard while getting up or sitting
down. They are not intended to bear the full weight of one person.

NOTE

Swivel up the side panel if transferring sideways (see chapter 4.2).

«
...
19
20
21
22
23
...
»

Summary of Contents for CANEO B

































































Reviews:

No comments

Related manuals for CANEO B

Brand: Decon wheel Pages: 4

Outlander WC01059

Brand: I-GO Pages: 16

Brand: Spinergy Pages: 47

Brand: Jay Pages: 38

Brand: acime Pages: 37

ROHO QUADTRO SELECT Series

Brand: Permobil Pages: 2

XXL-Rehab Shower Bench

Brand: Cobi Rehab Pages: 8

Crossfire All Terrain

Brand: Invacare Pages: 88

Brand: BraunAbility Pages: 26

Brand: Handicare Pages: 36

Brand: Airwheel Pages: 124

Brand: AC Mobility Pages: 24

Brand: Skil-Care Pages: 2

Brand: Sunrise Medical Pages: 8

Jay Active Back

Brand: Sunrise Medical Pages: 5

JAY Pelvic Positioning Belt

Brand: Sunrise Medical Pages: 16

Moonlight Breezy

Brand: Sunrise Medical Pages: 22

Brand: Sunrise Medical Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands