DIEBOLD NIXDORF BA9x BCR series, User Manual, Page: 89 / 99

BA9x BCR User Manual 81
Good Read Buzzer
The good read buzzer is activated after a barcode was successfully decoded and the
data was output. 3 types of tone and 5 types of duration are configurable. Buzzer
also can be disabled.
Commands Description
Buzzer Disable/Enable W0 Disable Buzzer
W8 Enable Buzzer (Default)
Buzzer Tone W1 Single tone buzzer (3000Hz) (Default)
W2 High – Low
W3 Low – High
Buzzer tome frequency
setting [DF0 Qa Qb
Qc Qd
Numerical setting of buzzer tone fre-
quency, (1000a+100b+10c+d) Hz
Default: 2,700Hz
Buzzer duration W7 50ms
[EFW 75ms
W4 100ms (Default)
W5 200ms
W6 400ms
Start-up Buzzer
This setting determines whether the scan engine emits a beep when it is powered
on.
Commands Description
Startup buzzer GD Disable startup buzzer (Default)
GC Enable startup buzzer
Read Timeout Buzzer
In case a barcode is not read within the timeout period, an error buzzer sounds
when the read operation ends.
Commands Description
Read timeout buzzer [EAP Disable read timeout buzzer (Default)
[EAQ Enable read timeout buzzer