DIEBOLD NIXDORF BA9x BCR series, User Manual, Page: 82 / 99

74 BA9x BCR User Manual
Read Modes
Commands Description
Single Read S0 Single Read in a single trigger. Reading
stops after success reading of a single
code or exceeding the read extended
time. (Default)
Multiple Read 1 [D3P Multiple read in a single trigger, the
module saves the read data in memory
not to read the same data.
Multiple Read 2 S1 Multiple read in a single trigger, the
module read the same data.
Central Reading
This function is used to read a target code when multiple codes are closely posi-
tioned. Reading can be activated only when the code is in the central portion of an
image as shown below.
Commands Description
Central Reading [D00 Enable central reading; read only a code
at the center of aiming LED
[D0Z Disable central reading; read an entire
image (Default)
Readable
Unreadable