DIEBOLD NIXDORF BA9x BCR series, User Manual, Page: 83 / 99

BA9x BCR User Manual 75
Trigger Repeat
Trigger repeat helps the user to properly aim the module before it starts scanning.
Aiming LED is emitted when the trigger is pressed and code at the center of the
beam is read when trigger is released.
Note: Trigger is not externally accessible, only through a pin-hole. Trigger is used
for configuration purposed, not for operational use.
Commands Description
Trigger Repeat /K Disable trigger repeat (Default)
/M Enable trigger repeat
Auto Trigger
When auto trigger is enabled, the module automatically detects an object in front
and starts reading it.
Commands Description
Auto Trigger +F Disable presentation auto trigger (De-
fault)
+I Enable presentation auto trigger
Auto Trigger Mode [DL5 Presentation auto trigger mode (Default)
[DL6 Hand held auto trigger mode
Auto Trigger Sensitivity
The sensitivity varies with the ambient environment and adjustment may be neces-
sary.
Commands Description
Auto trigger sensitivity [XMF Sensitive
[XMH Normal (Default)
[XMJ Insensitive