background image

Warranty, Warranty Period

Warranty

At the time of delivery, DIC warrants that the Separel module will be free from defects in material and
workmanship and meet the specifications supplied to the customer by DIC.

Warranty Period 

The following Warranty Period is applied only if customer use of the Separel module is in accordance with the 
instructions contained in this manual, the specification sheet, any applicable Cleaning Guides and the Warranty 
Statement.
(1) Water

Maximum 12 months from the date of delivery of the module

- This warranty period is applied only if customer refers to P.11, 3-3 (1).
- The above warranty will be voided in the event that water of unspecified quality is used. 

(2) Liquids other than water

- Water-Based Liquid         : Maximum 12 months from the date of delivery of the module*1
- Non-Water-Based Liquid : Maximum 6 months from the date of delivery of the module*1

*1 The warranty periods shown above are strictly to demonstrate the maximum warranty period available for
the modules. Any actual warranty period will be based upon the results of compatibility tests of the module
with all liquids which may come in contact with the module. The compatibility testing procedures will be
informed to the customer by DIC. It is the customer’s responsibility to conduct the compatibility tests and
provide the results thereof to DIC. In accordance with the results of the compatibility test, any warranty period
will be determined through consultations between DIC and the customer. DIC and the customer will agree in
writing to the warranty period, as well as, terms of use for the module (“Warranty Statement”).

If a liquid other than water (2) is used, only several SEPAREL products are applicable—please refer to Table 1 
below.

3

Model

Liquid

Water

Liquids other than water

Developing solution, Inkjet Inks and so on)*2

PF-001D series

PF-004D series

PF-015   series

PF-030   series

“․‒‾⁛ ⁛⁦⁗⁖‒⁦⁡‒⁞⁛⁣⁧⁛⁖⁥‒⁘⁡⁤‒⁩⁚⁛⁕⁚‒⁘⁞⁧⁛⁖‒⁕⁡ ⁢⁓⁦⁛⁔⁛⁞⁛⁦‒⁚⁓⁥‒⁔⁗⁗⁠‒⁨⁗⁤⁛⁘⁛⁗⁖†‒⁆⁚⁗‒⁂‸‟‸‒⁅⁗⁤⁛⁗⁥‒⁞⁛⁥⁦⁗⁖‒ ⁓‒⁓⁞⁥⁡‒⁔⁗‒⁧⁥⁗⁖‒⁘⁡⁤‒

‵⁚⁗ ⁛⁕⁓⁞⁥‒⁓⁠⁖‒⁅⁡⁞⁨⁗⁠⁦⁥†

⁆⁓⁔⁞⁗ ‣ ‵⁡⁤⁤⁗⁥⁢⁡⁠⁖⁗⁠⁕⁗‒⁦⁓⁔⁞⁗

INSTRUCTION MANUAL

Application Materials Product Division

Summary of Contents for SEPAREL EF-015






















Reviews: