DIAMOND AIRCRAFT
DA 20/100 Flight
Manual
Handling
Doc # 202-100-VLA
20 December, 2000
Page
Issue 1
8 - 5
8.4.5.
Road Transport
For transporting the airplane on the road, it is recommended to use an open trailer. All airplane
components must be stored on a cushioned surface and secured to avoid any movement during
transporting.
(a)
Fuselage:
The fuselage should be stored on the trailer standing on its wheels. It must be ensured that the fuselage
will not move forward, backward or upward. Furthermore it must be ensured that the propeller has
sufficient free space so it cannot be damaged in case the fuselage should move.
(b)
Wings:
For transportation, both wings must be removed from the fuselage.
To avoid any damage, the wings are stored in upright position on the leading edge with the root rib area
positioned on an upholstered profiled surface of at least 1 ft 4 in (400 mm) width. The outside wing area
(approximately 10 ft (3 m) from the root rib area) is placed on an upholstered profiled surface of a
minimum of 12 in (300 mm) width.
The wings must be secured to avoid any sliding movement to the rear.
c)
Horizontal Stabilizer:
The horizontal stabilizer is stored flat on the trailer and secured, or in an upright position sitting on the
leading edge on a profiled surface. All supports must be upholstered with felt or foam rubber.