DIAMOND AIRCRAFT
DA 20/100 Flight Manual
Description
Doc # 202-100-VLA
20 December, 2000
Page
Issue 1
7 - 5
Installation and Removal of the Control Lock:
1. Trim aircraft to zero (0) degrees.
2. Pull the left rudder pedals fully aft and check they are locked in position.
3. Hook the Control Lock's forks over the rudder pedal tubes as shown above.
4. Push down the Control Stick's leather boot to expose the Control Stick tube, and push the
Control Stick forward against the Control Lock.
5. Loop the straps around the Control Stick as shown, and push forward on the Control Stick.
6. Clip the straps into the left and right buckle receptacles located under the instrument panel.
7. Adjust the straps as required. Straps should be tight to secure the controls properly.
8.
TO REMOVE
, push the Control Stick forward (to relieve strap tension). Unclip the straps and
remove the Control Lock. Store in the aircraft's baggage compartment.