DIAMOND AIRCRAFT
DA 20/100 Flight
Manual
Normal Operating Procedures
Doc # 202-100-VLA
20 December, 2000
Page
DOT Approved
4 - 11
4.4.4. Before Taxiing
1.
Avionics Master Switch
ON
2.
Flight Instruments and Avionics
set
3.
Engine Gauges
check
4.
Voltmeter
check, ensure needle is in the
green arc. Increase RPM to
achieve or turn OFF non-flight
essential electrical consumers
5.
Warning Lights (Gen., Fuel Press., Canopy)
push to test
6.
Parking Brake
release
CAUTION
Warm-up engine to a minimum Oil Temperature of 122° F (50° C) at 1100
to 1500 RPM (also possible during taxi).
4.4.5. Taxiing
1.
Brake
check
2.
Direction Control
check
3.
Flight Instruments and Avionics
check
4.
Compass
check
CAUTION
At high Propeller RPM the propeller may be damaged by loose sand, gravel or water.