Diamond HR301-16, User Manual

Page: 24 / 208

User Manual of Digital Video Recorder
23
1.6 Starting Up and Shutting Down the Device
Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before you start:
Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground
connection is working properly.
Starting up the device:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2. Press the POWER button on the rear panel. The Power indicator LED should turn on indicating that the
device begins to start up.
Shutting down the device:
Steps:
There are two proper ways to shut down the device.
• Task 1: Standard shutdown
1. Enter the Shutdown menu.
Menu > Shutdown
Figure 1. 7 Shutdown Menu
2. Click the Shutdown button.
3. Click the Yes button.
4. Press the POWER button on the rear panel when the hint “Please power off” pops up to shut down the
device properly.
Take 2: By operating the front panel (not available for HR301 series)
1. Press and hold the POWER button on the front panel for 3 seconds.
2.
Enter the administrator’s username and password in the dialog box for authentication.
3. Click the Yes button.
Notes:
1) Do not press the POWER button again when the system is shutting down.
2) If you disable the ID Authentication in General Settings interface, the dialog box for authentication does
not pop up.
Rebooting the device
In the Shutdown menu (Figure 1.7), you can also reboot the device.