E100301X rev5
21/02/14
object
ATTENTION!
Never use the dryer without the fluff filter. If the
filter is damaged, replace it immediately.
EACH WEEK
Check the drum cleaning condition: there must no
be deposit on the drum. Be sure that there are not
stains due to melted nylon seams, button and
other.
ATTENTION!
To clean the drum, do not use a high pressure or
a water continuously cleaner.
The drum must be cleaned with a dried and soft
cloth.
EACH THREE MONTHS
Check the fan and the suction cleanness. Check
the drum and the ventilator motor cooling fans
cleanness.
EACH YEAR
An authorized service centre must be contacted
to:
- clean the burner or the heating element from
fluff and other
- clean the dryer inside
- control the pneumatic tightness
- control the gas tightness
WHEN NECESSARY
In case the temperature inside the burner reaches
too much higher values, a safety thermostatic
paste stops the heating system: the drum
continues to rotate, but the heating system stay
deactivated.
The thermostatic paste need to be manually
rearmed, in this case it is necessary to turn off the
dryer, cut all the energy supply, open the above
frontal door and press the brown coloured push
button near the thermostatic paste.
If the problem should repeat, switch off the dryer
and call the authorised service centre.
ATTENTION!
In case of tilting dryers, before to start any
maintenance service, control that the air
system is completely discharged and no
pneumatic movement can be activated, even
when if there is no electricity supply.
In case of maintenance with mechanism,
which are not in the rest position, be sure to
mechanically and safely block the pneumatic
mechanism.
45. DRYING PROBLEMS
In case of not satisfying drying results, please
check the following table to find a solution to the
most usual problems.
PROBLEM SOLUTION
The linen presents
yellow stains.
Check if the linen is
correctly rinsed and all
the soap is washed
away.
The PH value must be
included between 5
and 6.
The linen is yellowed.
Check that the drying
temperature is
complying with the data
on the label.
