INTRODUCTION
1.
Engine Display Panel
– Monitors and
displays various engine and machine
parameters.
2.
Ignition Switch
– Starts the engine and
provides power to certain components.
3.
Engine Throttle Switch
– Increases and
decreases engine/blade speed (RPM).
4.
Rope Cleat
– Secures front pointer rope.
5.
Free Wheel Switch
– Disengages the
transmission to allow for manual forward
and reverse movement of the saw.
6.
Display Lock, Spring Plunger
– Locks the
controller display in the open/closed
position.
7.
Emergency Stop Button
– Stops the
engine.
8.
Spotlight Switch
– Activates spotlight.
9.
Light Bar Switch
– Activates light bar.
10.
Water Pump Switch (Optional)
–
Activates water pump.
11.
USB Port Connection
- Allows for
program updates.
12.
Speed Control Lever
– Forward, reverse,
and neutral control.
13.
Saw Raise Pushbutton
– Activates
hydraulic pump to raise saw.
14.
Saw Lower Pushbutton
– Bleeds
hydraulic pressure from lift cylinder to lower
saw.
15.
Tilt Handlebar Pushbutton
– Allows
adjustment of handlebars up or down to
desired angle.
16.
Water On/Off Control Valve
- Turns water
flow, to the saw blade, on and off.
17.
Water Inlet Hose Connection –
Attachment point for water supply.
18.
LED Marker Light –
Illuminates when
machine is on.
19.
Handlebar
– Allows for operator control of
saw.
20.
Handlebar Lock Lever –
Locks the
handlebar extension in place.
21.
Rear Cover Screen Latch –
Allows for
removal of rear cover screen for servicing.
22.
Rear Cover Screen Pull Handle –
Allows
for easy handling of rear cover screen.
23.
Blade Lowering Speed Valve –
Controls
the lowering speed of the saw.
24.
Spot Light
– Provides area lighting.
25.
Spot Light Adjustment Knob
– Allows for
positioning of spot light.
9