Diamond Products CORE CUT CC110-SS, Operator'S Manual

Page: 31 / 40

CC110-SS and CC110D-DC Concrete Saw Manual 27
Engine
WARNING
•
Let the engine cool down prior to
servicing the saw.
•
DO NOT service the saw with the
engine running (unless stated otherwise).
Refer to the engine and CANtrak manuals and the
manufacturers for a full maintenance schedule and
all additional maintenance information
.
Cleaning the Engine
Wipe down the engine’s exterior, fans, and guards daily
to prevent high operating temperatures. DO NOT spray
the engine directly with water to prevent engine damage.
Storing
Complete the tasks listed below prior to storing the saw
for longer time frames:
•
Drain the water lines/hoses.
•
Drain all fluids.
•
Turn off all switches and controls.
•
Lower the saw completely to remove strain on the
lifting mechanism.
•
Clean and wipe down the saw to remove dust,
debris, and slurry from saw components (especially
fans).
•
Remove the battery and store in a proper location,
out of reach from children.
•
Refer to the engine manual for engine and fuel
recommendations.
•
Store the saw in a dry area, protected from outdoor
elements and out of reach from children.
Disposal
Dispose of the saw when it’s no longer repairable, and/or
contains safety hazards not worth repairing or
maintaining. Complete the tasks listed below when
discontinuing usage:
•
Drain all fluids and dispose of according to city,
state, and federal regulations.
•
Remove the battery and bring to a recycling facility;
many battery retailers also accept old batteries.
•
Transport the saw to a salvage yard or recycling
facility.