Diamond Power Products CC7074, Operator'S Manual

Page: 39 / 44

36
Appendix B
Daily Maintenance Task Chart
Table 3: Daily Maintenance Task Chart
Date
      
1.
Inspect the saw for damages
and repair.
2.
Tighten loose nuts, screws, and
bolts.
3.
Check all fluid levels (fuel,
engine oil, hydraulic fluid,
radiator fluid, upper and lower
gearbox oil) and fill as
necessary.
4.
Wipe down and clean all saw
components to remove dust,
debris, and slurry (especially
from fans).
5.
Inspect all belts for tension and
wear. Replace or tension as
necessary.
6.
Clean the air cleaner (see
engine manual).
7.
Check and clean the water filter
strainer.
8.
Clean the radiator and wipe
down the cooling fan.
9. Drain the heat sink.
10.
Look for fluid leaks and check
all hoses. Repair all damaged
components.
11. Refer to the engine manual and manufacturer for daily engine care and routine maintenance tasks.