Diamond Power Products CC7074, Operator'S Manual

Page: 13 / 44

10
Specifications
Table 1: CC7074 Specifications
Maximum Cutting Depth 19-3/4” with 48” blade
Blade Shaft Diameter 2”
Arbor Diameter 1” with single drive pin
Blade Shaft Bearings Multiple ball bearings in oil bath
Blade Shaft Drive 20 V-belts (four power bands)
Blade Mounting Right or left
Blade Raise/Lower Electro-hydraulic pump
Blade Coolant Dual multi-spray tubes
Blade Guard Attachment Slip-on through 30”, bolt-on 36” and up
Handlebars Length and tilt adjustable
Drive Speed 0-250 ft/min
Front Wheels 8” x 3”
Rear Wheels 10” x 3”
Transmission Hydro pump powering dual wheel motors
Uncrated Weight
(add 125 lb for crated weight)
2,000-2,225 lb
(weight depends on model and added options)
Table 2: Engine Specifications
Manufacturer Kubota
Model V3307-DI-T-E3-B
Maximum Horsepower (HP) 74.3 HP @ 2,600 RPM
Fuel Capacity Nine gallons
Fuel Type Low sulfur/ultra-low sulfur diesel fuel
Air Filter Four-stage with restriction indicator
Power at Blade Shaft 70 HP
Note: Refer to the engine manual and manufacturer for additional engine information and
specifications.