Diamond Multimedia Micronics C400, Manual

Page: 48 / 86

Micronics C400 System Board Manual
46
Soft Off By PWR-BTTN
This selection allows you to set your system’s power button
to Delay 4 Sec or Instant Off. When set to Delay 4 Sec and
the power button is pushed within 4 seconds, the system
will go into suspend mode. When the power button is
pushed over 4 seconds, the system will power off.
CPUFAN Off In Suspend
When enabled, this selection turns off the CPUFAN in
Suspend mode.
Resume By Ring
When this feature is turned on, the system will wake up
when an incoming call is detected on your modem. You
must set up the Mode Use IRQ selection.
Wake On LAN
This selection specifies whether the computer responds to
an incoming call or not. Wake On LAN requires a PCI
add-in network interface card with remote wakeup capa-
bilities and an ATX power supply that can handle the
power requirement for 5V standby.
IRQ 8 Break Suspend
Sets the monitoring of IRQ8 (Real Time Clock) so that it
does not awaken the system from Suspend mode.
Reload Global Timer Events
You can disable monitoring of common interrupt requests
so they do not awaken the system from, or reset activity
timers for Standby mode.
Chapter 4: The BIOS Setup Utility