Micronics C400 System Board Manual
Chapter 3: Installing the Micronics C400
27
Installing DIMMs
To install the DIMMs, locate the memory banks on the
system board and perform the following steps:
1.
Hold the DIMM so that the notched edge is aligned
with the notch on the DIMM socket (Figure 3-1).
2.
Insert the DIMM at a 90 degree angle.
3.
Gently push the DIMM straight down until it locks
into place (past the release tabs).
Figure 3-3: Installing a 168-Pin DIMM
Removing DIMMs
To remove DIMMs, follow the steps below:
1.
With both thumbs (or fingers), press the release tabs
away from the socket.
2.
With the DIMM free from the release tabs, lift the
module up and place in an anti-static bag or package.
Summary of Contents for Micronics C400
Page 18: ...Micronics C400 System Board Manual Chapter 2 Configuring the Micronics C400 16...
Page 62: ...Micronics C400 System Board Manual Chapter 5 Special Features 60...
Page 72: ...Micronics C400 System Board Manual Appendix B POST Codes 70...
Page 76: ...Micronics C400 System Board Manual Appendix D Updating the System BIOS 74...
