Diamond Multimedia Micronics C400, Manual, Page: 37 / 86

Micronics C400 System Board Manual
Chapter 4: The BIOS Setup Utility
35
TOR), and HDD mode (MODE). NOTE: We recommend
that you select type Auto for all drives.
Diskette A or B
To configure a floppy drive added to or removed from
your computer, use <
→/←↑
/
↓
> arrow keys to select the
desired drive. Use the <PU/PD/+/-> arrow keys to
change the setting until it matches the floppy drive you
installed. The BIOS supports 2.88MB, 1.44MB, 1.2MB,
720KB and 360KB floppy drives.
Video
Select the type of video card installed into your system.
The default setting is EGA/VGA.
Halt On
During the Power-On Self-Test (POST), the system
stops if the BIOS detects a hardware error. The default
setting is All Errors.
Base/Extended/Other Memory
A small section in the lower right corner of the screen
displays important information about your system that
includes the base, extended and other memory sizes. They
are updated automatically by the Setup program according
to the status detected by the BIOS self-test.