Diamond Multimedia Micronics C400, Manual

Page: 47 / 86

Micronics C400 System Board Manual
Modem Use IRQ
Select an IRQ setting to be used by the modem if Resume
by Ring is enabled.
Doze Mode
After the selected period of system inactivity (1 minute to
1 hour), the CPU clock runs at slower speed while all other
devices still operate at full speed.
Standby Mode
After the selected period of system inactivity (1 minute to
1 hour), the fixed disk drive and the video shut off while all
other devices still operate at full speed.
Suspend Mode
After the selected period of system inactivity (1 minute to
1 hour), all devices except the CPU shut off.
HDD Power Down
After the selected period of drive inactivity (1 to 15
minutes), the hard disk drive powers down while all other
devices remain active.
Throttle Duty Cycle
This option allows you to select the percentage of time that
the CPU clock runs when the system enters Doze Mode.
VGA Active Monitor
Select whether or not video activity restarts the global
timer for Standby Mode.
Chapter 4: The BIOS Setup Utility
45