•
Begin discing the road shoulder at a steady pace (10MPH/16KMH)
maximum for gravel roads, less for hard surfaced roads.
◦
Keeping the speed even and constant will allow the cutting discs to
feather the material evenly.
-
It is recommended to allow the material to dry for a minimum of
two to three days, longer if there is precipitation, before discing.
Dry material grades easier than wet material.
-
A roller will help on hard surfaced road shoulders. It is suggested
to disc, roll, grade, and then do a final roll for best results on hard
surfaced road shoulders.
-
Always grade after the first pass of the discs.
DO NOT
make multiple passes of the cutting discs and then
attempt to grade; there will be too much material to grade
effectively.
For more tips, visit us online at
www.DiamondMowers.com
Lowering the cutting discs too deep into the soil can damage the road
shoulder, and can cause damage to the cutting discs, housing, and
hitch frame.
13
Summary of Contents for ALL AMERICAN DISC
