diamond mowers ALL AMERICAN DISC, Operator'S Manual

Page: 9 / 28

MOUNTING THE SWING CYLINDER
The swing cylinder is OPTIONAL , and
may not be present. Reference the parts
pages in this manual for additional
clarification.
•
Unbolt the disc housing
(13)
from the
hitch frame
(14)
.
•
Mount the swivel assembly
(15)
between the disc housing
(13)
and
hitch frame
(14)
.
•
Mount the base anchor
(18)
to the
hitch frame
(14)
.
•
Mount the base end of the swing
cylinder
(19)
to the base anchor
(18)
.
•
Swing the disc housing
(13)
until the
swivel assembly
(15)
is straight.
•
Mount the rod anchor
(16)
to the
disc housing
(13)
.
◦
DO NOT tighten the hardware
securing the rod anchor
(16)
to the
disc housing
(13)
at this time.
•
Connect the rod end of the swing
cylinder
(19)
to the rod anchor
(16)
.
•
Extend the swing cylinder
(19)
rod to
full extension.
◦
Keep the disc housing
(13)
in its
straight orientation, and allow
the rod anchor
(16)
to slide down
the length of the disc housing
(13)
as needed for the swing
cylinder
(19)
rod to be at
full extension.
•
Secure the rod anchor
(16)
to the
disc housing
(13)
. Place the spacers
(17)
onto the swing cylinder
(19)
shaft.
(14)
(13)
(17)
(16) (15)
(14)
(18)
(19)
(19)
9