diamond mowers ALL AMERICAN DISC, Operator'S Manual

Page: 17 / 28

TROUBLESHOOTING
For any questions, contact our Warranty / Service team at
888.960.0364 or 605.977.3300
PROBLEM POTENTIAL CAUSE SOLUTION
Disc Will Not Lift
Hydraulic cylinder
lift lines are not
connected Connect the hydraulic cylinder lift
lines as instructed in this
operator’s manual.
Hydraulic cylinder or
hose leaks Tighten hose connections.
Repair leaky cylinders and hoses.
Hydraulic cylinder
faulty Repair or replace faulty cylinder.
Tractor 3-Point hitch
not working
Reference tractor operator manual for
troubleshooting the 3-Point
hitch system.
PROBLEM POTENTIAL CAUSE SOLUTION
Excessive
Vibration
Tractor 3-Point hitch
lower draft beam
float links set to
float (if equipped)
Place the tractor’s 3-Point hitch lower
draft beam float links to their
fixed position.
Loose hardware
Torque all hardware to the
recommended torque specifications
for that hardware.
Cutting blades are
employed too deep,
or at the wrong pitch Verify the cutting blades are being
employed as recommended in the
operator’s manual.
Cutting assembly
is damaged or
unbalanced
Replace damaged blades.
Remove any debris (wire, etc.)
entangling the cutting
assembly.
17