Diamond Engineering PC-9042-NS, Installation And Configuration Manual

Page: 9 / 29

9
Installation & Configuration PC-9042 Portable Anechoic Chamber
IMPORTANT - Follow all notes and information - it is extremely useful to have two people to
facilitate the movement of the chamber when not in completely assembled form. The center
section is shipped connected to one of the end pieces for added stability
.
Unpacking and moving the Chamber
Unpacking the Chamber
1. Cut Black Strapping and unwrap chamber sections, remove any boxes sitting below sections.
2. SINGLE HALF - Using two people (EST WEIGHT 160 LBS), lift the chamber from the corner
supports and place onto floor.
3. DOUBLE HALF - Unclip the 8 draw clamps (two per top, bottom, sides) both sides should be
relatively free.
4. Using two people (EST WEIGHT 120 pounds / 160 pounds), lift each chamber from the corner
supports and place onto floor.
Support Blocks
Draw Clamps
WHEN ROLLING CHAMBER SECTIONS, DO NOT LET WHEELS GET CAUGHT ON
ANYTHING. LIFT OVER ANY LIPS OR UNEVEN STEPS.
Caster wheels
MUST
be fully retracted
before moving!!