Diamond Engineering PC-9042-NS, Installation And Configuration Manual

Page: 15 / 29

15
Installation & Configuration PC-9042 Portable Anechoic Chamber
Telescopic Column
The fiberglass mast includes at least one telescopic column that is for mounting your DUT. The face of this
column includes a 3/8-16 threaded stud which can be removed and flipped to reveal a 1/4-20 threaded stud.
Simply unscrew the cap, pull out stud and turn it around as shown in the photo below.
Alternatively, you can also attach a second telescopic column to extend the DUT closer to positioner.
Adapter for Stud or Threaded DUT
Some DUTs may have studs while others have a threaded hole, so we’ve included a fiberglass adapter with a
screw that can be used to transition the studded end of the telescopic column to accommodate a DUT with
up to a 1/4-20 threaded stud. To attach, remove the stud (pictured above) altogether and replace the cap.
This will leave a 3/8-16 threaded hole. Using the included screw, attach the square fiberglass adapter. Insert
your DUT with 1/4-20 stud and use a wing nut to secure it to this adapter.
DUT Mounting Options (Column)